• English
  • العربية
  • 中文
  • Français
  • Русский
  • Español

You are here

New CRP: Enhancing Global Knowledge on Deep Borehole Disposal for Nuclear Waste (T22003)


Figure 1: Deep Borehole Disposal schematic illustration assuming disposal into a bedrock. (Image: Sandia National Laboratories, SNL Report SAND2019-1915, Deep Borehole Disposal Safety Case, 2019)

The IAEA is launching a new Coordinated Research Project (CRP) to increase international knowledge and drive progress towards testing deep borehole disposal (DBD) for intermediate and high level radioactive waste.

All countries operating nuclear reactors – be it for power generation, isotope production, research or any other application – need to provide geological disposal capacity for spent nuclear fuel and various types of radioactive waste. The internationally established approach is for disposal in a mined deep geological repository (DGR) in the Earth’s bedrock. Finland is set to implement the world’s first DGR, and several other countries are advancing their DGR programmes.

The new CRP has been launched in response to interest expressed by several countries – for example Australia, Croatia, Denmark, Norway and Slovenia – in further exploring whether DBD might also provide a suitable option for disposal of their specific inventory of radioactive waste. The primary motivation is to develop a more cost-effective disposal approach, without jeopardizing safety. Further studies on the DBD concept can build on decades of prior desktop studies conducted in countries such as the United Kingdom and the United States of America, as well as on some recently conducted scoping studies.

“Several countries want to find out if deep borehole disposal would be suitable for their specific waste inventories,” said Stefan Mayer, an expert in radioactive waste disposal at the IAEA. “The conceptual studies and generic assessments done so far look promising, and to take the idea further, the IAEA is inviting research organizations to join this four-year CRP, which aims to help countries make an informed decision on whether to choose DBD.”

The DBD concept considers disposal in a stable geologic formation at depths of several kilometres into the base rock, although recent scoping studies have also considered depths of several hundred metres – comparable to those of a mined DGR. Figure 1 illustrates vertical emplacement and stacking of waste disposal containers over the height of a disposal zone, assumed to be located deep within the bedrock. The borehole above the disposal zone would be plugged and sealed over a height of several kilometres. Alternative depths and heights of the disposal zone are also being considered, and the specific design depends on the volume and specific properties of radioactive waste, as well as on the specific properties of the site selected for borehole disposal.

CRP overall objective

The overall objective is to provide a comprehensive suite of assessments at the strategic and programmatic level to help countries make an informed decision on DBD.

The intention is to expand the scientific and technical groundwork demonstrating the safety and implementation of the DBD concept to effectively provide the basis for a future field-scale demonstrator. The CRP also hopes to develop preliminary plans for a field demonstrator of the deep borehole concept that aligns with the national needs of at least one of the CRP participants.

The CRP is open for research proposals.

Specific research objectives

  • Structuring the deep borehole disposal concept, the associated materials, concept of operations as well as construction and closure; assessing and progressing, as needed, the corresponding Technical Readiness Levels
  • Identifying site data needs, assessing and progressing, as needed, the capacity to conduct site characterization for DBD
  • Assessing and progressing as needed monitoring approaches allowing to verify the as-built conditions
  • Considerations of safeguards by design
  • Assessing and progressing as needed the suite of functions and performances the DBD system is expected to deliver, as well as the associated scenarios, FEPs (features, events and processes), models and simulation capacity
  • Operational risk assessment and long-term safety assessment

How to join this CRP

Please submit your Proposal for Research Contract or Agreement by email, no later than 15 October 2023 to the IAEA’s Research Contracts Administration Section, using CRP ID ‘‘T22003’ and the appropriate template on the Coordinated Research Activities web portal.

For further information related to this CRP, potential applicants should use the contact form on the CRP page. The IAEA encourages institutes to involve, to the extent possible, women researchers and young researchers in their proposals.

Stay in touch