What information is included in these status reports?
The IAEA has been providing regular status updates to the competent authorities within its member states since the Fukushima accident occurred on 11 March 2011.
The IAEA now issues regular status reports to the public on the current status of the Fukushima Dai-ichi Nuclear Power Plant, including information on environmental radiation monitoring, the status of workers, and current conditions on-site at the plant.
The information cited in the status reports is compiled from official Japanese sources, including the Ministry of Education, Culture, Sports, Science and Technology (MEXT), the Ministry of Economy, Trade and Industry (METI), the Nuclear and Industrial Safety Agency (NISA), the Ministry of Land, Infrastructure, Transport and Tourism (MLIT), the Ministry of Health, Labour and Welfare (MHLW) and the Ministry of Foreign Affairs (MOFA) through the Japanese Permanent Mission in Vienna and the Cabinet's Office of the Prime Minister. Information is also provided by the Tokyo Electric Power Company (TEPCO), the operator of the Fukushima Dai-ichi Nuclear Power Plant.
Questions on the information provided in these reports may be directed to [email protected].
What is the situation regarding evacuation areas and protective measures for the public?
Measurements of gamma dose rates are being taken continuously at fixed reference locations in each Japanese prefecture. Since 13 March, the dose rates generally show a decreasing trend. The current rate of this decrease is small due to fact that short half-life radionuclides have decayed.
Japanese authorities have compiled data on the concentrations of radioactive caesium on the ground surface at roughly 2 200 locations within approximately 100 kilometers from the Fukushima Dai-ichi Nuclear Power Plant. These studies have been conducted by measuring air dose rates and collecting soil samples. More information on these studies and distribution maps of radiation doses can be found in the 30 August report: Corrections to Readings of Airborne Monitoring Surveys (Soil Concentration Map) based on Prepared Distribution Map of Radiation Doses.
On 30 September, the Nuclear Emergency Response Headquarters lifted the restriction of the Evacuation Prepared Areas in Case of an Emergency. Current evacuation areas are shown in the map provided by METI.
Japanese authorities have allowed temporary access to evacuated areas for residents and business owners. Access is provided to allow for retrieval of belongings and is conducted such that proper radiation protection and monitoring measures are taken.
For more details on actions taken by Japanese authorities to assist residents in the area, please refer to the 17 October version of the document: Roadmap for Immediate Actions for Assistance of Residents Affected by the Nuclear Incident.
Food monitoring collection and data is provided by the Ministry of Health, Labour and Welfare. As of 26 October, current food restrictions are available here.
What is the current status of the Fukushima Dai-ichi Nuclear Power Plant?
An important element of TEPCO's Roadmap Towards Restoration is to use circulating water to remove heat from Units 1-3 at the Fukushima plant. TEPCO has established a system to circulate cooling water through the reactors, treat accumulated water in the affected buildings and reuse water to inject into the reactors. Systems have been established to remove radioactive materials desalinate accumulated water.
TEPCO has reported that the temperatures in the reactor pressure vessels (RPV) of Units 1-3 have stabilized below 100 degrees. Bringing the temperatures below 100 degrees Celsius is an important step in stabilizing the reactors.
In addition to recirculating water to remove heat from Units 1-3, additional measures have been taken by TEPCO to manage the volume of water used to cool the reactors. Large tanks to store contaminated water from the cooling process have recently been set up, and an additional 2 800 tons of water storage capacity was installed on 17 September.
Approximately 128 140 tons of accumulated, contaminated water has been processed chemically as of 13 October. This process reduces caesium concentration in the water, improving its suitability for storage and further treatment.
TEPCO has also taken action to reduce the amount of contaminated water entering the ocean. On 28 September, a steel pipe sheet pile was completed at the south side of the intake canal for Units 1-4.
To reduce the dispersion of radionuclides to the environment, a steel superstructure has been constructed to cover Unit 1. The final roof panel was installed on 14 October.
Measures to remove loose debris on-site continue, and approximately 700 container-loads of debris have been gathered and stored as of 17 October.
Table 1: Status of Cooling Water Flow, Temperatures and Pressure at Units 1, 2 and 3
TEPCO's Fukushima Dai-ichi Nuclear Power Plant station reactors 1, 2 and 3 require circulating water to remove heat from their fuel.
Plant operators are working to bring the reactors into a "cold shutdown condition" defined by TEPCO and the Nuclear Emergency Response Headquarters as:
All data below are provided to the IAEA by Japanese authorities:
Further information regarding progress on-site is available in the 17 October update: Roadmap Towards Restoration from the Accident at Fukushima Dai-ichi Nuclear Power Station.
What protective measures have been taken for the workers at Fukushima Dai-ichi?
TEPCO has worked to improve working conditions at Fukushima Dai-ichi by increasing the number of rest stations at the work site. In addition, the living environment has been improved through the provision of temporary dormitories, meals, bathing and laundry facilities. TEPCO has constructed and continues to develop an onsite medical facility staffed by doctors and nurses trained in treatment for radiation injuries. This staff and its services are available 24/7 in the event of a medical emergency.
TEPCO preforms regular monitoring of its workers for both internal and external radiation exposure. Workers use industry standard personal dosimeters that provide a reading of how much external radiation each individual has been exposed to throughout the course of their work. Radiation monitoring capabilities continue to be enhanced. One example of these enhanced capabilities is through the installation of an additional 12 whole body counting units since 3 October. Whole body counting units are specialized radiation monitoring units that are used to detect if any radioactive material has been received internally.
What is the IAEA's strategy for strengthening global nuclear safety?
In response to the Fukushima accident, IAEA Member States unanimously approved the IAEA Action Plan on Nuclear Safety in September 2011 that sets out a programme of work to strengthen the global nuclear safety framework. These actions require a concerted effort from the IAEA Member States and the IAEA Secretariat for the coming years. A dedicated Action Plan Team is now implementing measures set out in the Action Plan.
Learn more about the Action Plan here.
How has the IAEA responded to the Fukushima accident?
In the event of a large-scale radiation emergency, the IAEA's role is to provide prompt notification of the event to its Member States and international organizations, coordinate international assistance upon request of the accident state and disseminate accurate and timely public information on the accident.
The IAEA conducts these activities primarily through its Incident and Emergency Centre (IEC), a 24-hour round-the-clock response centre based at IAEA headquarters in Vienna. The IEC was activated on 11 March in the hours following the Japanese earthquake and tsunami and established contact with the IAEA's emergency counterpart in Japan, the Nuclear and Industrial Safety Agency (NISA).
Upon activation, the IEC 1) began to distribute information on the accident status to the IAEA's 151 member states and several international organizations, 2) offered emergency assistance to Japan, and 3) provided continuous updates on the accident status via the IAEA website and other communications channels.
Since March 11, the IAEA instituted several measures to assist Japan through arrangements established by the organization and international nuclear and legal frameworks. Following the accident, the IAEA dispatched several teams of specialized technical missions to Japan to 1) monitor radiation levels throughout the country, including locations around the Fukushima Daiichi nuclear plant, 2) discuss technical issues with the Japanese authorities related to the boiling water nuclear reactor design used at the Fukushima plant, 3) participate in marine radiation monitoring missions off the coast of the Fukushima plant, and 4) provide assistance, in coordination with the Food and Agricultural Organization (FAO), on technical issues related to food and agricultural safety.
IAEA Director General Yukiya Amano travelled twice to Japan to express solidarity and full support to the Japanese people, confer with the Japanese government and to survey the damage and current recovery efforts at Fukushima Daiichi.
Two high-level international missions have been sent to Japan in recent months. From late May through early June, the IAEA dispatched a team of nuclear power and safety experts to Japan to gather a comprehensive set of conclusions and lessons learned that have been distributed through the global nuclear community. Its full mission report can be accessed here.
A recent mission conducted in October focused on the remediation of areas off-site the Fukushima Nuclear Power Plant affected by the consequences of the 11 March accident. A preliminary report of its findings can be accessed here.
Since the accident occurred on 11 March, the Director General has provided updates on the Fukushima Dai-ichi accident to the general public and IAEA member states. The IAEA is now issuing regular updates on its Website and Facebook page.