HTGR Knowledge Base

Conference Article: Life time test of a partial model of HTGR helium-helium heat exchanger

Kitagawa, Masaki; Hattori, Hiroshi; Ohtomo, Akira; Teramae, Tetsuo; Hamanaka, Junichi; Itoh, Mitsuyoshi; Urabe, Shigemi (Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan))

Abstract

Authors had proposed a design guide for the HTGR components and applied it to the design and construction of the 1.5 Mwt helium heat exchanger test loop for the nuclear steel making under the financial support of the Japanese Ministry of International Trade and Industry. In order to assure that the design method covers all the conceivable failure mode and has enough safety margin, a series of life time tests of partial model may be needed. For this project, three types of model tests were performed. A life time test of a partial model of the center manifold pipe and eight heat exchanger tubes were described in this report. A damage criterion with a set of material constants and a simplified method for stress-strain analysis for stub tube under three dimensional load were newly developed and used to predict the lives of each tube. The predicted lives were compared with the experimental lives and good agreement was found between the two. The life time test model was evaluated according to the proposed design guide and it was found that the guide has a safety factor of approximately 200 in life for this particular model.

view the full text of this article (12 pages, format: PDF, size= 558kB)

key words: Gas Cooled Reactor, Nuclear Technology
Reference:
Specialists' meeting on heat exchanging components of gas-cooled reactors Duesseldorf (Germany) 16-19 Apr 1984
International Atomic Energy Agency, International Working Group on Gas-Cooled Reactors, Vienna (Austria)
IWGGCR--9, pp:127-138