HTGR Knowledge Base

Conference Article: Operational monitoring of the release behaviour of the AVR core

Wawrzik, U.; Ivens, G. (Arbeitsgemeinschaft Versuchsreaktor AVR, Juelich (Germany))

Abstract

The AVR reactor has been used for the mass testing of spherical HTR fuel elements for more than 17 years. To date 14 fuel element types have been used, some of which differ considerably with reference to the heavy metal content, fuel coating and chemical fuel composition. The aim of the measurements at the reactor and of a comprehensive post-irradiation examination programme for fuel elements is to check and evaluate the behaviour of these fuel elements under real reactor conditions. This paper considers only those measurements which are of interest for reactor operation. The integral release behaviour of the fuel elements is continuously monitored by measuring the noble fission gas activity in the primary system. This value is directly determined by the heavy metal contamination. If any significant particle defects occur during operation, these are immediately indicated by a considerable increase in the noble gas activity. The integral release of the solid fission products is monitored by means of filter samples both in the hot and in the cold gas area. This examination, however, is performed intermittently and with a time delay. As these integral measurements only allow one to draw limited conclusions about the behaviour of single fuel element charges or types, they are supplemented by the systematic extraction of fuel elements. These elements are then subjected to standardized annealing tests (KFA) to determine the individual noble gas release, and to examinations of the fuel-free shell to establish the distribution of the solid fission products in it (AVR). The latter method, in particular, has proved to be practicable, as particle defects are detected at an early stadium. During operation to date, only one fuel element charge exhibited incipient particle defects shortly before reaching its final burnup. It was possible to limit the activity release by altering the charging strategy, which resulted in lower fuel element temperatures, and by systematically discharging the fuel element charge in question.

view the full text of this article (12 pages, format: PDF, size= 466kB)

key words: Gas Cooled Reactor, Nuclear Technology
Reference:
Specialists' meeting on fission product release and transport in gas-cooled reactors Berkeley (United Kingdom) 22-25 Oct 1985
International Atomic Energy Agency, International Working Group on Gas-Cooled Reactors, Vienna (Austria)
IWGGCR--13, pp:15-26