HTGR Knowledge Base

Conference Article: Structural strength of core graphite bars

Kikuchi, K.; Futakawa, M. (Japan Atomic Energy Research Inst., Tokai, Ibaraki. Tokai Research Establishment)

Abstract

A HTR core consists of fuel, hot plenum, reflector and thermal barrier blocks. Each graphite block is supported by three thin cylindrical graphite bars called support post. Static and dynamic core loads are transmitted by the support posts to the thermal barrier blocks and a support plate. These posts are in contact with the blocks through hemispherical post seats to absorb the relative displacement caused by seismic force and the difference of thermal expansion of materials at the time of the start-up and shutdown of a reactor. The mixed fracture criterion of principal stress and modified Mohr-Coulomb's theory as well as the fracture criterion of principal stress based on elastic stress analysis was discussed in connection with the application to HTR graphite components. The buckling fracture of a support post was taken in consideration as one of the fracture modes. The effect that the length/diameter ratio of a post, small rotation and the curvature of post ends and seats exerted on the fracture strength was studied by using IG-110 graphite. Contacting stress analysis was carried out by using the structural analysis code 'COSMOS-7'. The experimental method, the analysis of buckling strength and the results are reported. The fracture of a support post is caused by the mixed mode of bending deformation, split fracture and shearing fracture.

view the full text of this article (5 pages, format: PDF, size= 457kB)

key words: failure mode analysis; fracture properties; graphite; htgr type reactors; reactor cores; rotation; shape; sleeves; stress analysis; stresses; supports; carbon; gas cooled reactors; graphite moderated reactors; mechanical properties; mechanical structures; reactor components; system failure analysis; systems analysis
Reference:
Specialists' meeting on graphite component structural design, JAERI Tokai (Japan), September 8-11, 1986
International Atomic Energy Agency, Vienna (Austria). International Working Group on Gas-Cooled Reactors
IWGGCR--11, pp:108-112