HTGR Knowledge Base

Conference Article: Earthquake analysis with nonlinear soil-structure interaction and nonlinear supports of components.

Abstract

For the determination of the seismic response of a structure the soil-structure interaction in most cases is modelled by a mass-spring-damper-system. Normally design concepts for components and piping are based on linear calculations and stress limitations. A concept for a reactor building for the HTR 100 consisted of a relatively high structure compared with the dimensions of the foundation. The structure was comparatively deep embedded in the soil, so here the embedment influences significantly the soil-structure interaction. The assembly of reactor vessel, heat exchanger and circulators has a height of about 37 m. Supports are arranged at different levels. Due to temperature deformations of the vessel and of the support constructions small gaps at the supports may only be avoided by complicated constructions of the supports. Nonlinear analyses were performed for soil, building and component with all supports. The finite element analyses used time histories. In order to describe the radiation damping the hysteresis of the soil with 1 percent material damping was considered. Nonlinearities in the interface of soil and foundation and due to gaps and friction at the supports were taken into account. The stiffness of the support constructions influences reactions and accelerations to a high extent. Properly chosen stiffnesses of the support constructions lead to a behaviour similar to linear elastic behaviour.

view the full text of this article (8 pages, format: PDF, size= 438kB)

Reference:

Seismic behaviour of gas cooled reactor components. Proceedings of a specialists' meeting held in Gif-sur-Yvette, France, 14-16 November 1989

International Atomic Energy Agency, Vienna (Austria). International Working Group on Gas-Cooled Reactors

IWGGCR--22, pp:27-34