HTGR Knowledge Base

Conference Article: Structural instabilities of high temperature alloys and their use in advanced high temperature gas cooled reactors

Schuster, H.; Ennis, P.J.; Nickel, H. (Kernforschungsanlage Juelich GmbH (Germany, F.R.). Inst. fuer Reaktorwerkstoffe); Czyrska-Filemonowicz, A. (Akademia Gorniczo-Hutnicza, Cracow (Poland). Inst. Metalurgii)

Abstract

High-temperature, iron-nickel and nickel based alloys are the candidate heat exchanger materials for advanced high temperature gas-cooled reactors supplying process heat for coal gasification, where operation temperatures can reach 850-950 deg. C and service lives of more than 100,000 h are necessary. In the present paper, typical examples of structural changes which occur in two representative alloys (Alloy 800 H, Fe-32Ni-20Cr and Alloy 617, Ni-22Cr-12Co-9Mo-1Al) during high temperature exposure will be given and the effects on the creep rupture properties discussed. At service temperatures, precipitation of carbides occurs which has a significant effect on the creep behaviour, especially in the early stages of creep when the precipitate particles are very fine. During coarsening of the carbides, carbides at grain boundaries restrict grain boundary sliding which retards the development of creep damage. In the service environments, enhanced carbide precipitation may occur due to the ingress of carbon from the environment (carburization). Although the creep rate is not adversely affected, the ductility of the carburized material at low and intermediate temperatures is very low. During simulated service exposures, the formation of surface corrosion scales, the precipitation of carbides and the formation of internal oxides below the surface leads to depletion of the matrix in the alloying elements involved in the corrosion processes. In thin-walled tubes the depletion of Cr due to Cr2O3 formation on the surface can lead to a loss of creep strength. An additional depletion effect resulting from environmental-metal reactions is the loss of carbon (decarburization) which may occur in specific environments. The compositions of the cooling gases which decarburize the material have been determined. They are to be avoided during reactor operation

view the full text of this article (1 pages, format: PDF, size= 51kB)

key words: Gas Cooled Reactor, Nuclear Technology
Reference:
High temperature metallic materials for gas-cooled reactors. Proceedings of a specialists meeting held in Cracow, 20-23 June 1988
International Atomic Energy Agency, Vienna (Austria). International Working Group on Gas-Cooled Reactors
IWGGCR--18, pp:50-50