HTGR Knowledge Base
Conference Article: Research on in-pile release of fission products from coated particle fuels
Fukuda, K.; Iwamoto, K. (Department of Fuels and Materials Research, Japan Atomic Energy Research Institute, Tokai-mura, Ibaraki-ken (Japan))Abstract
Coated particle fuels fabricated in accordance with VHTR (Very High Temperature gas-cooled Reactor) fuel design have been irradiated by both capsules and an in-pile gas loop (OGL-1), and data on the fission products release under irradiation were obtained for loose coated particles, fuel compacts and fuel rods in the temperature range between 800 deg. C and 1600 deg. C. For the fission gases, temperature- and time dependences of the fractional release(R/B) were measured. Relation between release and failure fraction of the coated particles was elucidated on the VHTR reference fuels. Also measured was tritium concentration in the helium coolant of OGL-1. In-pile release behavior of the metallic fission products was studied by measuring the activities of the fission products adsorbed in the graphite sleeves of the OGL-1 fuel rods and the graphite fuel container of the sweep gas capsules in the PIE. Investigation on palladium interaction with SiC coating layer was included.
view the full text of this article (16 pages, format: PDF, size= 871kB)
key words: Gas Cooled Reactor, Nuclear Technology
- Reference:
- Specialists' meeting on fission product release and
transport in gas-cooled reactors Berkeley (United
Kingdom) 22-25 Oct 1985
- International Atomic Energy Agency, International Working Group on Gas-Cooled Reactors, Vienna (Austria)
- IWGGCR--13, pp:41-56
- International Atomic Energy Agency, International Working Group on Gas-Cooled Reactors, Vienna (Austria)