HTGR Knowledge Base

Conference Article: Mathematical Model and Computer Code for Coated Particles Performance at normal operating conditions

Abstract

Computer modeling of thermo-mechanical behavior of coated particles during operating both at normal and off-normal conditions has a very significant role particularly on a stage of new reactors development. In Russia a big experience has been accumulated on fabrication and reactor tests of CP and fuel elements with UO2 kernels. However, this experience cannot be using in full volume for development of a new reactor installation GT-MHR. This is due to very deep burn-up of the fuel based on plutonium oxide (up to 70% fima). Therefore the mathematical modeling of CP thermal-mechanical behavior and failure prediction becomes particularly important. The authors have a clean understanding that serviceability of fuel with high burn-ups are defined not only by thermo-mechanics, but also by structured changes in coating materials, thermodynamics of chemical processes, “amoeba-effect’, formation CO etc.

In the report the first steps of development of integrate code for numerical modeling of coated particles behavior and some calculating results concerning the influence of various design parameters on fuel coated particles endurance for GT-MHR normal operating conditions are submitted. A failure model is developed to predict the fraction of TRISO-coated particles. In this model it is assumed that the failure of CP depends not only on probability of SiC-layer fracture but also on the PyC-layers damage. The coated particle is considered as a uniform design.

view the full text of this article (16 pages, format: PDF, size= 391kB)

Reference:

Proceedings of the Conference on High Temperature Reactors, Petten, NL, April 22-24, 2002
Organized by HTR-TN in cooperation with the European Nucler Society (ENS) and the IAEA

International Atomic Energy Agency, Vienna (Austria)

HTR-2002, pp:1-16