Fast Reactors and Accelerator Driven Systems Knowledge Base

Conference Article: Development of martensitic steels for high neutron damage applications

Abstract

Martensitic stainless steels have been developed for both in-core applications in advanced liquid metal fast breeder reactors (LMFBR) and for first wall and structural materials applications for commercial fusion reactors. It can now be shown that these steels can be expected to maintain properties to levels as high as 175 or 200 dpa, respectively. The 12Cr-1Mo-0.5W-0.2C alloy HT-9 has been extensively tested for LMFBR applications and shown to resist radiation damage, providing a creep and swelling resistant alternative to austenitic steels. Degradation of fracture toughness and Charpy impact properties have been observed, but properties are sufficient to provide reliable service. In comparison, alloys with lower chromium contents are found to decarburize in contact with liquid sodium and are therefore not recommended. Tungsten stabilized martensitic stainless steels have appropriate properties for fusion applications. Radioactivity levels are being less than 500 years after service, radiation damage resistance is excellent, including impact properties, and swelling is modest. This report describes the history of the development effort.

view the full text of this article (10 pages, format: PDF, size= 608kB)

Reference:

Influence of high dose irradiation on core structural and fuel materials in advanced reactors. Technical committee meeting, Obninsk (Russian Federation), 16-19 Jun 1997

International Atomic Energy Agency, Vienna (Austria)

IAEA-TECDOC--1039, pp:169-178