Waste Technology Section

International Decommissioning Network (IDN)


Video gallery

Regional Practical Workshop on the Cutting Technologies for Decommissioning, Greifswald, Germany - 05—08 September 2011



Dry cutting area – Post cutting place: cleaning of the turne table Wet cutting area – Cutting of the coat ring of the reactor cavity bottom with band-saw Wet cutting area – Cutting of the bottom plate of the reactor cavity bottom with CAMC
Wet cutting area – Cutting of the coat ring of the reactor cavity bottom with the plasma burner Wet cutting area – Cutting of the tubes of the reactor cavity bottom with the plasma burner Dry cutting area – Post cutting place: cutting of the upper ring of the protection tube unit 1 with band-saw
Wet cutting area – Cutting of the coat ring of the protection tube unit 1 with the plasma burner Wet cutting area – Cutting of the protection tubes for measuring lines with angle plasma burner Wet cutting area – Cutting of the upper plate of the protection tube unit 1 with CAMC
Wet cutting area – Taking samples from the reactor cavity 1 Wet cutting area – Transport of the upper plate of the reactor cavity bottom 1 with gripper for reactor plates
Rate this page:
Follow the IAEA:        
Responsible: Webmaster | 06 Oct, 2011
Pagefragment