HomeNuclear Fuel Cycle and Materials Section
Nuclear Power Reactor Fuel Engineering
TECHNICAL MEETING “IN-PILE TESTING AND INSTRUMENTATION FOR DEVELOPMENT OF GENERATION-IV FUELS AND MATERIALS”
Presentations
- Session 0 - Opening
- Session 1 - Instrumentation Development
- 1.1 - Development and testing of instruments for Generation IV materials research at the Halden Reactor Project
- 1.2 - Instrumentation and control for loop test
- 1.3 - Development of instruments for fuel and material irradiation tests in JMTR
- 1.4 - New sensors for irradiation testing at materials and test reactors
- 1.5 - Irradiation test of linear variable differential transformers in the WWR-K core
- 1.6 - Welding techniques for in-pile instrumentation at INR Pitesti
- 1.7 - Improved in-pile measurements for MTR experiments
- 1.8 - Rapid non-destructive detection and measurement of nuclear fuels and core structural materials
- 1.9 - Measurement of the core axial power distribution by copper wire activation
- Session 2 - Irradiation Techniques
- 2.1 - Development of a drilling machine for the instrumentation of thermocouple in a fuel pellet
- 2.2 - Endeavor to improve in-pile testing techniques in the experimental fast reactor JOYO
- 2.3 - AECL's experimental fuel and material test loops in NRU
- 2.4 - Development of irradiation technique for in-pile tests in JMTR
- 2.5 - Halden reactor materials testing techniques and selected results
- 2.6 - Development of pneumatic bellows based loading devices for mechanical testing in LWR, SCWR and LFR relevant environmental conditions
- Session 3 - Experimental Studies
- 3.1 - Heavy neutron irradiation test of materials in JOYO irradiation rigs
- 3.2 - In-pile experiments in a uranium-zirconium-hydride triga fuel
- 3.3 - Reactor tests and post-irradiation investigations of HTGR core fuels and components
- 3.4 - In-pile measurements of helium production and release in BODEX irradiation experiment
- Session 4 - Reactor Operation and Safety
- Technical Visits
